Return to Overview

The following five types of envelopes can be loaded into the envelope feeder attachment: COM10 No.10, Monarch, DL, ISO-B5, and ISO-C5.

The setting of the machine and guide size is set to COM10 No. 10 as the default setting.

• When you attach the envelope feeder attachment to the paper drawer, do not forcefully move the front guide of the paper drawer in the wrong direction. Doing so may detach the envelope feeder attachment from the paper drawer.

• Do not print on both sides of an envelope. Doing so may cause paper jams, dirty prints, or make the inside of the machine dirty.

• Do not load the following types of envelopes inside the envelope cassette. Doing so may cause paper jams, dirty prints, or make the inside of the machine dirty.

• Curled, creased, or folded envelopes

• Very thick or thin envelopes

• Damp or wet envelopes

• Torn envelopes

• Irregularly shaped envelopes

• Envelopes with clasps or windows

• Envelopes that have already been sealed

• Envelopes with holes or perforations

• Envelopes with specially coated surfaces

• Envelopes made of surface treated colored paper

• Envelopes that are self-sticking, which use ink, glue, or other substances that can melt, burn, vaporize, or emit smells under the heat of a fixing unit (approximately 200 °C). Depending on the materials used for the seal, the glue may melt under the fixing unit's heat, sealing the envelopes.

• When the envelop cassette is attached and envelope is selected for the paper type, it outputs to the tray located under the scanner unit.

• If you are printing on envelopes, empty the output tray when up to 10 printed envelopes accumulate in the tray.

• Envelopes should be stored in a place away from high-temperatures and humidity.

• If there is a temperature difference between the location where the envelopes were stored and the location where the envelopes are being printed, leave the envelopes in the printing location at room temperature before you use them.

• Correctly match the paper size dial, size switch, and [Register Envelope Drawer] in [Preferences] (Settings/Registration) with the size of the envelopes being loaded. Failure to do so may cause paper jams, dirty prints, or make the inside of the machine dirty.

• If you want to adjust the width guides to load ISO-C5 or ISO-B5 envelopes, contact your local authorized Canon dealer.

• For more information on envelope types that can be loaded in the envelope feeder attachment, see "Basic Operations."

• Sizes of the envelopes are as follows:
  • COM10 No.10: 104.7 mm × 241.3 mm
  • Monarch: 98.4 mm × 190.5 mm
  • DL: 110 mm × 220 mm
  • ISO-B5: 176 mm × 250 mm
  • ISO-C5: 162 mm × 229 mm

• Back To Top