Return to Overview

To "Settings/Registration Table"

You can reposition the stapler of the saddle stitcher unit after clearing a staple jam, or after replacing the staple cartridge. Saddle stitch staple repositioning works by feeding several sheets of paper into the saddle stitcher unit and stapling them together.

You can make adjustments to the folding position and stapling position at the same time.

For information on the optional products required to use this function, see "Optional Products Required for Each Function."

• If transparencies are loaded in a paper drawer, make sure to pull out that paper drawer slightly so that transparencies are not fed for the saddle stitch staple repositioning procedure. Damage to the machine may occur if transparencies are fed during this procedure.

• Only use A3, B4, or A4R paper for the saddle stitch staple repositioning procedure.

• Make sure to remove all output booklets from the Booklet Tray before performing the saddle stitch staple repositioning procedure.

• Paper that is required for the saddle stitch staple repositioning procedure is automatically fed to the saddle stitcher unit by the machine.

1. Press (Settings/Registration) → [Adjustment/Maintenance] → [Adjust Action] → [Saddle Stitcher Staple Repositioning].

2. Press [Start].

• Back To Top